STEP
1
Fix (15 x 40mm) battens onto the wall with a maximum gap
of 40cm between them. Do not forget to surround doors and
windows. Leave space for air to circulate between the batten
assemblies for passing the necessary ducts and cables.
Horizontal laying
Vertical laying
STEP
2
Insert glass wool or another material between the battens
to insulate or restore your walls. Plan to use battens that
are thicker than the glass wool (15mm thicker).
Horizontal laying
Vertical laying
STEP
3
Take the utmost care when laying the first strip (it will
determine the final result).
Horizontal laying
Vertical laying
STEP
4
Leave 10mm between the panelling and the floor
STEP
5
Fix the strips by nailing (20 x 1.2mm) or stapling (13 x 16mm).
We advise against laying with clips.
STEP 6
Nail or glue the mouldings.
IMPORTANT
•
The
product must be unpacked 4 days before laying and stored
horizontally
in the room where it will be laid
; this room should be maintained in normal conditions
of use.
• Plan to lay the panelling after all humidification
work and ventilate the room well after laying.
• Plan to lay the panelling at least 20 days after
having ensured that the plaster or concrete is dry.
• Comply with the DTU 36.1 standard.
•
